As I said in one of my previous posts, I _love_ VMWare Player (much more than its Workstation brother). There is no surprise, I want to have some neat port forwarding (from HOST machine to VMWare).
I found the following information on
http://asunix.tufts.edu/howto/vmware/portforwardingWin7:
Step 0: If using VMware Workstation, continue to Step 1. However, if using VMware Player, you need to extract the `Virtual Network Editor' from the installer via the following command:
$> VMware-player-setup.exe /e .\extract
Go into `extract' -> `network' and copy `vmnetcfg' into the VMware Player directory before you use this tool. Once `vmnetcfg' is in the VMware Player folder, you can launch this tool to configure the NAT port forwarding.
Step 1: Open the Virtual Network Editor ( either from Workstation or launch `vmnetcfg' )
Step 2: Choose `VMnet8' from the interface list, change the Subnet IP at the bottom of the panel to `192.168.192.0' then and choose `NAT Settings...' from the VMnet Information panel.
Step 3: Ensure that the Gateway IP is set to `192.168.192.2' and then choose `Add' under the Port Forwarding panel.
Step 4: Fill in the port map information with the following data:
Host Port: 22
Type: TCP
Virtual machine IP address: 192.168.192.100
Virtual machine port: 22
Description: SSH
Step 5: Apply all settings and close out of the Virtual Network Editor.